Pronar ZKP 800 is a double rotor rotary rakes with hydraulic regulation of working width from 7 m 8 m and manual lock of required width. Swath width can be set from 0.9 to 1,9 m.
Pronar ZKP 800 is equipped with two rotors with eleven working arms. Each arm ends with four double raking fingers. . Using it is very simple, while ensuring the effectiveness. Turned linkage enables perfect steering of the rake. Lower links enable additional ground following behind the tractor. Rear Turing Wheel of the drawbar improve menoeuvrability.Tandem axle system of the rotors guarantees correct ground surface cracking and facilitates keeping the required driving route of the rake. Self aligning rotors enable longitudinal and Lateran ground surface cracking.The rake offers also manual adjustment of raking height and hydraulic synchronized raising and lowering rotors.Can be used for operations on tractors I and II cat. ZKP 800 power requirement amounts to 59 kW (80 HP), and it weights 1940 kg. The gearbox is lubricated with grease.
For operations on tractors I and II cat
Despite small size – efficiency for 7ha/h.
EASY TO USE
Operator can easily set needed parameters.
In the production process to use the most modern technologies and components.
|Total length in working/transport position||5400/5400||mm|
|Width in working/transport position||mm|
|Height in working position||1450||mm|
|Height in transport position|
|Number of rotors||2||pcs.|
|Number of working arms||11||pcs.|
|Number of raking tines on one arm||4||pcs.|
|Suspension system||Cat. I and II in acc. with ISO 730-1|
|Turning wheel of the drawbar||Pneumatic on tandem axle, front axle steering|
|Drive system for the rotors||tandem type with 6 wheels|
|Type of rotary gear||dry ( lubrication with grease)|
|Overload protection WPT||Single direction and overload protectecing clutch 900 Nm|
|PTO speed WOM||540||rpm|
|Recommended moving speed||10||km/h|
|drive system 400 kPa||10.0/75-15.3||-|
|mrotors drive system 160 kPa||10.0/75-15.3||-|
|Voltage stability of electric power system||16x6.5-8(6PR)||-|
|Required hydraulic outputs||12||V|
|Raking width adjustment||double-sided single section + double-sided single section in floating position|
|Raising and lowering of rotors||hydraulic and synchronized system|
|Rubber wheels 340/55-16||On special order|
Copyright © 2017-2018 PronarUK. All rights reserved.
Designed & Developed by JARS Services Pvt. Ltd.
We are approved and regulated by Financial Conduct Authority, FRN 804318.We may use your information to pass on to our approved lenders that are listed in our Terms & Conditions